- Data is the Most Vital Aspect
- Troubleshooting “Spilled Water on Laptop Won’t Turn On”
Spilled Water on Laptop Won’t Turn On, this is a very complaint.
No matter how careful we are with technology, accidents always tend to happen.
Although there is a strong correlation between the clumsier you are and the more accidents you face, nobody is safe from such disasters.
Accidents can include many things. A laptop can fall from an unsafe position causing irreparable damage to some delicate components. It may be accidently placed in a scorching environment which can lead to overheating.
Likewise, one of the many disasters that you can face is getting water spilled on your laptop. The last you want to yourself to cry about is: spilled water on laptop won’t turn on!
A laptop is a sensitive piece of technology which consists of many different components. When your hardware is faulty, it is hard to detect which part of your laptop is causing the issue and how to fix it.
Therefore, if your laptop does not turn on you accidently soaked it, then it could be caused due to several problems.
Data is the Most Vital Aspect
The situation becomes aggravated in this case because it is not just the physical laptop that can get damaged, but your precious data is also at stake.
You can replace the laptop, but data, on the other hand, is sometimes invaluable and irreplaceable.
It is not an easy task to fix a laptop if gets drenched in water.
Unfortunately, no matter how careful you are, accidents happen.
This article is going to talk about the most common of all laptop-related accidents. Let’s find out what to do when you spill water on your laptop and it doesn’t turn on.
Troubleshooting “Spilled Water on Laptop Won’t Turn On”
So you spilled water on laptop won’t turn on. You will be glad to know that you are not alone with this complaint. More than half of the laptop related accidents are due to spills. Let’s see how we can diagnose and troubleshoot this.
1. Turn off Any Power Supply
As soon as the accident occurs, be sure to turn off any power supply. I hope you were quick enough to respond.
That means you should turn if off completely, detach it from its charger and remove the battery from its slot if it’s possible. Every second counts. The laptop will short out if the water touches the circuits in the laptop. Only after completing these steps you will be safe from shock. Make sure your hands are dry while turning off the laptop. If you are not sure, place a towel of some kind of cloth over your
Only after completing these steps will you be safe from shock. You will also increase the chance of your laptop surviving.
Make sure your hands are dry while turning off the laptop. If you are not sure, place a towel or some piece of cloth over your fingers and hold the power button.
2. Detach any peripheral hardware
Remove everything that can be removed from your laptop.
Any peripheral hardware such as a mouse, a wireless card, an external keyboard, any USB device or speakers should be immediately removed.
After that, turn your laptop upside down and flatten it out completely so that the keyboard and the screen are on the same level. The keyboard and the screen should be facing the ground and placed on a towel.
The laptop should remain in the position described in the previous section for at least a couple of hours. This is the optimal time to make sure that water drips out of the laptop.
Water is the least damaging liquid for your laptop since it causes minimal corrosion and can drip out easily. Alcohol and sugary substances would certainly be more damaging for the hardware and circuits.
After a couple of hours have passed, dry the outside of the laptop with a lint-free paper towel or cloth.
The remaining water can simply pour out. After that, open the keyboard and take care of the remaining water with a towel.
4. Opening Your Laptop
This article won’t contain the information needed to disassemble your laptop since you must know it in the first place. If an accident like this occurs to you, don’t waste your time on the Internet trying to find out how to take your laptop apart. Instead, you must seek professional help.
You must remove everything, your keyboard, top panel, drives (hard and optical), memory modules, and of course the motherboard. After you do that, check every single part for damage.
Water should not be able to cause some extreme damage, but other substances can cause corrosion and damage.
Specifically, you want to check for short circuits on the motherboards. You can check this near the power IC (near the power socket) for blown fuses. If there is any blackened area, there is most certainly a short circuit. Check for any leaks from the capacitors.
If there are none, you are good to go. However, if there is, then you need to take it to the repair shop immediately.
Again, you should not attempt opening the laptop if you have the faintest doubt. There are videos available for disassembling laptops online like the one as follows. However, I would still recommend consulting with an expert.
Assuming you have no short circuit and everything seems to be in order, you can proceed to the next step.
5. Drying again
You should let every part dry naturally. Place your laptop in a dry area with each part placed on a towel or a piece of cloth and let it be there for up to two days.
If you are not keen on waiting that long, feel free to use some light or moderate heat source to speed up the drying process. Do not think of any kind of heaters to be a viable option. This also includes a hair dryer.
A hair dryer operating on its stronger level can melt some core parts of your laptop. Melting simply cannot be fixed and you will have to find a replacement.
Additionally, if there is any moisture left in the laptop or any of its core parts, a hair dryer may send that moisture deeper into the parts which can, in extreme cases, lead to complete shutdown of that part or the complete laptop.
6. Reassemble Your Laptop and Hope for the Best
You have done everything in your power to prevent the water from ruining your laptop any further. Now it’s the time to check if your effort was in vain or not.
Put your laptop back together, but be very careful. If you notice anything strange about any part, do not install it. Search online to see what caused that strange appearance.
7. Try turning on your laptop
If it doesn’t turn on, don’t lose all hope. Contact a nearby repair shop and keep your fingers crossed.
If you are lucky, only the Power IC will be blown. This can be replaced quite easily. However, if the processor or any other microprocessors on the motherboard are damaged, that’ll be a very unfortunate case.